Building a Project
Project Download Procedures
4.3
4.3.1
Connection with Peripheral Devices
The following notes describe how the project is downloaded to a FX PLC. To connect a controller
of the FX family and a PC, the SC 09 converter is used to convert the RS232 common mode
serial signals 'to and from' the computer to the RS 422 serial-differential format required by the
PLC.
4.3.2
Communications Port Setup
Before the project can be downloaded into the PLC CPU for the first time, the communication
and download settings must be configured.
From the Online menu, select Transfer Setup and then Ports :
The Connection Setup window shown on the next page will be displayed.
Training Manual GX IEC Developer
Project Download Procedures
SC 09 cable
4 - 37