Table of Contents
Advertisement
58 58
Occupant safety
1
ISOFIX mounting bracket
Before every journey, make sure that the ISOFIX
child restraint system is engaged correctly in both
mounting brackets in the vehicle.
Attach the ISOFIX child restraint system to
#
both mounting brackets in the vehicle.
F F ast
astening a T
ening a Top Tet
op Tether
her
& W W ARNING
ARNING Risk of injury or death if the
rear seat backrests are not locked a er
Top Tether belts are installed
The rear seat backrests may fold forwards
when you are driving.
As a result, child restraint systems will no lon-
ger be able to perform their intended protec-
tive function. This may also cause additional
injuries.
Always lock rear seat backrests a er
#
installing Top Tether belts.
Observe the lock veri cation indicator.
#
If the le and right seat backrests are not
engaged and locked in place, this will be shown
on the display on the instrument display.
If the center seat backrest is not engaged and
locked in place, the red lock veri cation indicator
will be visible.
¯ If the child restraint system is equipped
with a Top Tether belt:
The risk of injury may be reduced by Top
Tether. The Top Tether belt enables an
additional connection between the child
restraint system attached with LATCH-type
(ISOFIX) (le and right rear seats) or the
seat belt (all rear seats) and the vehicle.
If necessary, slide head restraint
#
(
page 91).
/
1
upwards
Advertisement
Table of Contents
