Mercedes-Benz C-Class Coupe 2023 Operator's Manual page 116

114 Light and visibility 114
Switching on high beam Switc hing on high beam
Turn the light switch to the L or Ã
#
position.
Push the combination switch beyond the point
#
of resistance in the direction of arrow 1.
When the high beam is activated, the indicator
lamp for low beam L will be deactivated
and replaced by the indicator lamp for high
beam K.
Switc Switching hing o o high beam high beam
Move the combination switch back to its start-
#
ing position.
Headlam Headlamp p ashing ashing
Pull the combination switch in the direction of
#
arrow 3.
T T ur urn signal light n signal light
T T o indicat o indicate e br brie y: ie y: push the combination
#
switch brie y to the point of resistance in the
direction of arrow 2 or 4.
The corresponding turn signal light will ash
three times.
T T o indicat o indicate per e permanently: manently: push the combina-
#
tion switch beyond the point of resistance in
the direction of arrow 2 or 4.
Vehicles with Active Lane Change Assist:
A turn signal indicator activated by the
R
driver may continue to operate for the
duration of the lane change.
If the driver indicated directly beforehand
R
but a lane change was not immediately
possible, the turn signal indicator may acti-
vate automatically.
A A ctiv ctivating/deactiv ating/deactivating t ating the hazar he hazard w d war arning lights
Press button 1.
#
The hazard warning lights will switch on automati-
cally if:
the air bag has been deployed.
R
ning lights