Mercedes-Benz C-Class Coupe 2023 Operator's Manual page 382

Table of Contents

Advertisement

380 Wheels and tires
380
The wear patterns on the front and rear wheels
di er:
Front wheels wear more on the tire shoulder
R
Rear wheels wear more in the center of the
R
tire
Do not drive with tires that have too little tread
depth. This signi cantly reduces traction on wet
roads (hydroplaning).
On vehicles that have the same size front and rear
wheels, rotate the wheels according to the inter-
vals in the tire manufacturer's warranty book in
your vehicle documents. If this is not available,
rotate the tires every 3,000 to 6,000 miles
(5,000 to 10,000 km), depending on the wear.
Ensure that the direction of rotation is main-
tained.
N N o o t t es on st
es on stor oring wheels
ing wheels
When storing wheels, observe the following notes:
A er removing wheels, store them in a cool,
R
dry and preferably dark place.
Protect the tires from contact with oil, grease
R
or fuel.
Ov Over ervie
view of t
w of the tir
he tire-c
e-chang
hange t e tool kit
ool kit
* N N O O TE TE Mercedes-AMG vehicles
Observe the notes in the Supplement.
#
You could otherwise fail to recognize
dangers.
Apart from some country-speci c variants, vehi-
cles are not equipped with a tire-change tool kit.
For more information on which tire-changing tools
are required and approved for performing a wheel
change on your vehicle, consult a quali ed spe-
cialist workshop.
You require the following tools, forexample, to
change a wheel:
Jack
R
Chock
R
Lug wrench
R
Alignment bolt
R
The tire-change tool kit is located under the trunk
oor.
%
Depending on the model, the tire-change tool
kit may be located at other positions under
the trunk oor.
1
Lug wrench
2
Folding chock
3
Jack
Pr Prepar
eparing t
ing the v
he vehicle f
ehicle for a wheel c
or a wheel change
hange
R R eq equir uirements:
ements:
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
R
ground.

Advertisement

Table of Contents
loading

Table of Contents