Table of Contents
Advertisement
* N N O O TE TE Engine damage caused by an incor-
rect oil lter, incorrect oil or additives
Do not use engine oils or oil lters other
#
than those which meet the speci cations
necessary for the prescribed service
intervals.
Do not alter the engine oil or oil lter in
#
order to achieve longer change intervals
than prescribed.
Do not use additives.
#
Have the engine oil changed a er the
#
prescribed intervals.
Mercedes-Benz recommends having the oil
changed at a quali ed specialist workshop.
Only use engine oils approved for your vehicle by
Mercedes-Benz.
Quality and capacity of engine oil
Quality and capacity of engine oil
Engine oil speci cation
Engine oil
speci cation
Model
Model
MB-Freig
MB-Fr
eigabe or MB-
Approv
Approval al
All models
229.51, 229.52,
229.61, 229.71,
229.72
1) Recommended for lowest possible fuel consumption (lowest SAE
viscosity class in each case; observe possible restrictions of the
approved SAE viscosity classes).
To achieve the lowest possible fuel consumption,
it is recommended to use the engine oil speci ca-
tions marked in the table for the lowest SAE vis-
cosity class. Possible restrictions of the approved
SAE viscosity classes must be observed.
Engine oil lling
Engine oil
lling capacity
capacity
Model
Model
C 300
C 300 4MATIC
The speci ed lling capacity refers to an oil
change with the oil lter.
abe or MB-
N N o o t t es on br
es on brak ake e uid
uid
Observe the notes on operating uids
1)
(
page 392).
/
& W W ARNING
ARNING Risk of an accident due to
vapor pockets forming in the brake system
The brake uid constantly absorbs moisture
from the air. This lowers the boiling point of
the brake uid. If the boiling point is too low,
vapor pockets may form in the brake system
when the brakes are applied hard.
This causes the braking e ect to be impaired.
Have the brake uid renewed at the
#
speci ed intervals.
Technical data 395
395
Capacity
Capacity
7.0 US qt (6.6 liters)
6.3 US qt (6.0 liters)
Advertisement
Table of Contents
