Table of Contents
Advertisement
396 Technical data
396
Have the brake uid regularly replaced at a quali-
ed specialist workshop.
Only use a brake uid approved by Mercedes-
Benz according to MB-Freigabe or MB-Approval
331.0.
Coolant
Coolant
N N o o t t es on coolant
es on coolant
Observe the notes on operating uids
(
page 392).
/
& W W ARNING
ARNING ‑ Risk of re and injury from
antifreeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite.
Allow the engine to cool down before
#
adding antifreeze.
Make sure that no antifreeze spills out
#
next to the ller opening.
Thoroughly clean o any antifreeze from
#
component parts before starting the
vehicle.
* N N O O TE TE Damage caused by incorrect cool-
ant
Only use coolant that has been premixed
#
with the required antifreeze protection.
Information on coolant is available at the fol-
lowing locations:
In the Mercedes-Benz Speci cation for
R
Operating Fluids 320.1
At https://bevo.mercedes-benz.com
-
In the Mercedes-Benz BeVo app
-
At a quali ed specialist workshop
R
* N N O O TE TE Overheating at high outside temper-
atures
If an inappropriate coolant is used, the cooling
system is not su ciently protected against
overheating and corrosion at high outside
temperatures.
Only use coolant approved for
#
Mercedes-Benz.
Observe the instructions in the
#
Mercedes-Benz Speci cations for Oper-
ating Fluids 320.1.
Have the coolant regularly replaced at a quali ed
specialist workshop.
Proportion of antifreeze concentrate in the cool-
ing system:
A minimum of 50% (antifreeze protection down
R
to about -35°F (-37°C))
A maximum of 55% (antifreeze protection
R
down to -49°F (-45°C))
Coolant lling
Coolant
lling q q uantity
uantity
Coolant
Coolant
Model
Model
Capacity
Capacity
All models
9.5 US qt (9.0 liters)
N N o o t t es on windshield w
es on windshield washer
asher uid
uid
Observe the notes on operating uids
(
page 392).
/
Advertisement
Table of Contents
