Table of Contents
Advertisement
348 Breakdown assistance
348
Open cover
2
of positive contact
#
jump-starting connection points.
S S t t ar arting assist
ting assistance
ance
Connect positive contact
3
on your vehicle
#
to the positive terminal of the donor battery
using the jumper cable. Always begin with
positive clamp
3
on your own vehicle rst.
Start the engine of the donor vehicle and run
#
it at idling speed.
Connect the negative terminal of the donor
#
battery to ground point
using the jumper cable. Begin with the donor
battery rst.
Start the engine of your own vehicle.
#
Let the engines run for several minutes.
#
Before disconnecting the jumper cables,
#
switch on an electrical consumer in your own
vehicle, e.g. the rear window heater defroster
or the lighting.
When the starting assistance procedure is com-
plete:
3
of the
First, remove the jumper cables from ground
#
point
4
and the negative terminal of the
donor battery, then from positive contact
and the positive terminal of the donor battery.
Begin each time with the contacts on your
own vehicle rst.
A er removing the jumper cables, close cover
#
2
of positive contact 3.
Close cover 1.
#
Further information can be obtained at a quali ed
specialist workshop.
4
of your vehicle
Charging
Char
ging
Connect positive contact
#
the positive terminal of the charger using the
charging cable. Always begin with positive
contact
Connect the negative terminal of the charger
#
and ground point
charging cable. Start with the charger.
Start the charging process.
#
When the charging process is complete:
First, remove the charging cable from ground
#
point
4
3
charger, then from positive contact
the positive terminal of the charger. Begin
each time with the contacts of the vehicle.
A er removing the charging cable, close cover
#
2
of positive contact 3.
Close cover 1.
#
3
of the vehicle to
3
of the vehicle.
4
on the vehicle with the
and the negative terminal of the
3
and
Advertisement
Table of Contents
