Brake Pad Replacement - Suzuki AN650 2002 Service Manual

9-74 CHASSIS

BRAKE PAD REPLACEMENT

• Remove the brake-lock arm 1 and spring 2.
• Disconnect the brake-lock cable 3. (
• Remove the caliper.
Do not operate the brake lever while dismounting the
pads.
• Remove the pad mounting pins 4, and then remove the
brake pads.
• Clean up the caliper especially around the pistons.
• Inspect the pad mounting pins for wear. If excessive wear is
found, replace the mounting pins with new ones.
• Assemble the new pads 5, insulators 6 and shims 7.
Replace the brake pads as a set, otherwise braking
performance will be adversely affected.
9-85)