Suzuki AN650 2002 Service Manual page 261

8-18 COOLING AND LUBRICATION SYSTEM
• Remove the E-ring 1 and impeller 2.
• Remove the mechanical seal using the special tool.
09921-20240: Bearing remover set
NOTE:
If there is no abnormal condition, the mechanical seal removal is
not necessary.
The removed mechanical seal must be replaced with a
new one.
• Remove the outer bearing using the special tool.
09921-20240: Bearing remover set
NOTE:
If there is no abnormal noise, bearing removal is not necessary.
The removed bearing must be replaced with a new
one.
• Remove the circlip 1.
• Remove the inner bearing using the special tool.
09921-20240: Bearing remover set
NOTE:
If there is no abnormal noise, bearing removal is not necessary.
The removed bearing must be replaced with a new
one.