Front Brake; Construction - Suzuki AN650 2002 Service Manual

FRONT BRAKE

CONSTRUCTION

(
ITEM N·m kgf-m
)
10 1.0
*
23 2.3
+
7.5 0.75
,
26 2.6
-
18 1.8
.
2.5 0.25
/
13 1.3
* This brake system is filled with an ethylene glycol-based DOT 4 brake fluid. Do not use mix
different types of fluid such as silicone-based or petroleum-based.
* Do not use any brake fluid taken from old, used or unsealed containers. Never reuse brake
fluid left over from the last servicing or stored for long periods.
* When storing the brake fluid, seal the container completely and keep away from children.
* When replenishing brake fluid, take care not to get dust into fluid.
* When washing brake components, use fresh brake fluid. Never use cleaning solvent.
* A contaminated brake disc or brake pad reduces braking performance. Discard contaminated
pads and clean the disc with high quality brake cleaner or neutral detergent.
Handle brake fluid with care: the fluid reacts chemically with paint, plastics, rubber materials
etc. and will damage then severly.
lb-ft
7.0
16.5
5.5
19.0
13.0
1.8
9.5
Diaphragm
! Dust boot
" Piston/cup set
# Brake hose
$ Boot
% Caliper
& Brake pad spring
' Brake pad
Piston seal
) Dust seal
* Piston
+ Caliper holder
, Insulator
Shim
)
* Front brake master cylinder mounting bolt
+
Brake hose union bolt
, Air bleeder valve
- Brake caliper mounting bolt
. Pad mounting pin
/ Plug
Cliper holder pin
CHASSIS 9-63