Suzuki AN650 2002 Service Manual page 157

CVT CASING/COVER
• Wipe the CVT casing/cover mating surface with a cleaning
solvent.
• Fit the dowel pins.
• Apply a small quantity of SUZUKI SUPER GREASE to the
grease groove A of the primary pulley shaft.
99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
Do not apply grease under the groove A.
• Cover the secondary pulley shaft with a vinyl film to prevent
oil seal damage.
• Apply a small quantity of engine oil to the main lip B of the oil
seal.
ENGINE OIL
• Apply SUZUKI BOND "1215" to the mating surface of the CVT
casing.
99000-31110: SUZUKI BOND "1215"
NOTE:
* Make surfaces free from moisture, oil, dust and other foreign
materials.
* Spread on surfaces thinly to form an even layer, and assemble
the CVT casing and cover within few minutes.
CVT 5-23