Suzuki AN650 2002 Service Manual page 117

3-66 ENGINE
• Coat the O-ring of the driveshaft oil seal retainer with grease
and install it.
• Install the driveshaft oil seal retainer to the crankcase.
Driveshaft oil seal retainer bolt:
NOTE:
Use a new O-ring.
CLUTCH
• Install the clutch shaft to the clutch assembly.
• Coat the part A of the clutch shaft with SUZUKI MOLY
PASTE.
99000-25140: SUZUKI MOLY PASTE
• Install the clutch assembly, washer 1 and clutch housing nut
2 to the left crankcase.
• Using the special tool, tighten the clutch housing nut to the
specified torque.
09930-40113: Rotor holder
Clutch housing nut: 70 N·m (7.0 kgf-m, 5 lb-ft)
• Install the new gasket 3 and dowel pins.
• Install the clutch cover.
22 N·m (2.2 kgf-m, 16.0 lb-ft)