Suzuki AN650 2002 Service Manual page 28

2-10 PERIODIC MAINTENANCE
NOTE:
* Be sure to apply engine oil to tappet shim top and bottom
faces.
* When seating the tappet shim, be sure to face figure printed
surface to the tappet.
Reinstall the camshafts as the specified manner.
( 3-72)
• After replacing the tappet shim and camshafts, rotate the
engine so that the tappet is depressed fully. This will squeeze
out oil trapped between the shim and the tappet that could
cause an incorrect measurement, then check the clearance
again to confirm that it is within the specified range.
• After finishing the valve clearance adjustment, reinstall the fol-
lowing items.
* Cylinder head cover .........................................3-74
* Spark plug and plug cap ..................................2-6
* Valve timing inspection plug ............................2-8
Page
170
1.70 mm