Table of Contents
Advertisement
No.
Item
6
Date and Time
7
Controller Mode
8
Control Method
9
Stop Key Active
10
Protection Out Active
11
Boot Screen
12
Main Screen Theme
Timer Setting
1
Preheat Delay
2
Prestart Fuel Time
3
Cranking Time
4
Crank Rest Time
5
Safety On Delay
6
Start Idle Time
7
Warming Up Time
8
Cooling Time
9
Stop Idle Time
10
ETS Solenoid Hold
11
Wait Stop Time
HEM4300 Engine Controller User Manual
Range
Default
(0-1)
1
(0-2)
0
(0-1)
0
(0-1)
0
(0-1)
1
(0-1)
0
(0-3600)s
0
(0-3600)s
1
(3-60)s
8
(3-60)s
10
(0-3600)s
10
(0-3600)s
10
(0-3600)s
0
(0-3600)s
0
(0-3600)s
10
(0-3600)s
20
(0-3600)s
0
Description
backlit is always illuminated.
Users can calibrate date and time.
0: Instrument Mode; 1: Control Mode.
0: Controller Start/Stop Control;
1: External Key Start/Stop Control;
2: Controller + Key Start/Stop Control.
0: Disable; 1: Enable.
0: Disable; 1: Enable.
0: Disable; 1: Enable.
After it is enabled, user custom boot
screen can be displayed for each
power-on.
0:
Default
Theme
parameters);
1: Theme 1 (display 4 parameters).
NOTE: After switching theme, corresponding
theme screen needs to be written via upper
computer. If need to customize theme, please
contact service personnel.
Time for pre-heating plug to be
energized before starter is energized.
Time for fuel relay output every time
before starter is energized.
Time for starter to be energized every
time.
Waiting
time
before
energization when engine fails to start.
During this time oil pressure low, temp.
high, under speed, under frequency,
under voltage, and charge alt failure
alarms are all inactive.
Time for engine idle running in start
process.
Warming up time for engine before
normal
running
after
running.
Cooling time before stop
Time for engine idle running in stop
process.
Time for ETS to be energized before
stop.
Time after idle running delay before
complete stop when "ETS Solenoid
(display
6
second
high
speed
Page 25 of 55
Advertisement
Table of Contents
