Smartgen HEM4300 User Manual page 42

No. Type
18 DPF Regeneration Test Mode
19 Reserved
20 Reserved
21 Alarm Stop Inhibit
22 Reserved
23 Reserved
24 Remote Control Mode
25 External Charging Failure
26 High Temp Shutdown
27 Low OP Shutdown
28 Remote Start/Stop
29 Raise Speed
30 Drop Speed
31 Reserved
32 Simulate Stop Key
33 Simulate Start Key
34 Simulate Load Key
35 Simulate Reset Key
36 Simulate F1 Key
37 Simulate F2 key
38 Simulate F3 key
39 Simulate F4 key
40 Simulate F5 key
41 Simulate F6 key
42 Alt Config. 1 Active
43 Alt Config. 2 Active
44 Alt Config. 3 Active
45 Reserved
46 Reserved
47 Load Input
48 Reserved
49 Air Filter Block
50 Forward Rotation
51 Backward Rotation
52 Light Clamp
53 Forward Rotation Limit
54 Backward Rotation Limit
HEM4300 Engine Controller User Manual
command to ECU.
It simulates DPF regeneration request when input is active.
All shutdown alarms are inhibited except emergency stop and
over speed shutdown. (i.e. battle mode or override mode)
Controller will not start and remote start/stop can be realized
via "Remote Start/Stop Input" or RS485 communication when
input is active.
When input is active, failed to charge warning alarm occurs.
Connects to sensor digital input.
Connects to sensor digital input.
In remote control mode, when input is active, engine can start.
When input is inactive, engine will stop.
A button can be connected externally (not self-lock), manually
control speed.
An external button (unlatched) can be connected and pressed
as simulate panel key.
When input port is active, configuration is active; Different
parameters can be set for it, making convenience for users to
choose current configuration by input port.
Act between start idle and stop idle; When input is active, load
control outputs; When it is inactive, load control stops
outputting.
Air filter alarm occurs when input is active.
Forward rotation outputs when input is active.
Backward rotation outputs when input is active.
Light clamp outputs when input is active.
Forward rotation stops output when limit is active.
Backward rotation stops output when limit is active.
Description
Page 42 of 55