Smartgen HEM4300 User Manual page 34

No. Item
Alternate Configuration 2
1 Enable Choose
2 Engine Rated Speed
3 Engine Idle Speed
4 Speed Control Upper Limit
5 Load Output
6 Load Rate High Speed
Alternate Configuration 3
1 Enable Choose
2 Engine Rated Speed
3 Engine Idle Speed
4 Speed Control Upper Limit
5 Load Output
6 Load Rate High Speed
Maintenance Setting
1 Password Set
2 Maintenance 1 Set
3 Maintenance 2 Set
4 Maintenance 3 Set
5 Maintenance 4 Set
6 Maintenance 5 Set
7 Maintenance 6 Set
HEM4300 Engine Controller User Manual
Range Default
(0-1) 0
(0-6000)r/min 2000
(0-100.0)% 40.0
(0-6000)r/min 2000
(0-3) 2
(0-100.0)% 70.0
(0-1) 0
(0-6000)r/min 2000
(0-100.0)% 40.0
(0-6000)r/min 2000
(0-3) 3
(0-100.0)% 70.0
(0-65534) 01234
(0-1) 0
(0-1) 0
(0-1) 0
(0-1) 0
(0-1) 0
(0-1) 0
Description
0: Disable 1: Enable
When this is enabled, if input is
configured to "Alt Config. 2 Active" and
input is active, speed shall be adjusted
according to alternate configuration
settings.
0: Load Control;
1: Load Control 1;
2: Load Control 2;
3: Load Control 3.
When controller issues load rate high
warning signal, it will drop speed to the
value of high load rate.
0: Disable 1: Enable
When this is enabled, if input is
configured to "Alt Config. 3 Active" and
input is active, speed shall be adjusted
according to alternate configuration
settings.
0: Load Control;
1: Load Control 1;
2: Load Control 2;
3: Load Control 3.
When controller issues load rate high
warning signal, it will drop speed to the
value of high load rate.
It used for entering maintenance
parameter setting.
Caution! Default password is "01234"; It
can be changed by operator for purpose of
preventing others changing
advanced configuration randomly. Please
remember clearly after change. If it is
forgotten, please contact company service
personnel.
0: Disable 1: Enable
Maintenance time, maintenance time
due action, maintenance
method, reset maintenance time can
be set at the same time; After
maintenance, maintenance time due
controller
timing
Page 34 of 55