Supplied Parts - Quick BTH 513 Installation And Use Manual

2 - Supplied parts

2.0 - Package contains the following parts
• Hydraulic thruster
• Drill templete
• Gasket
• User's manual
• Conditions of warranty.
2.1 - Tools needed for installation
• Hexagonal male key: 5 mm, 8 mm e 14 mm
• Fork or polygonal key: 27
2.2 - Quick® accessories for activation of the thruster
• TCD 1022
• TCD 1022
• TCD 1042
• TCD1044
• TCD1062
• TMS
• TSC
• PCS TJ1
• PCS TJ2
• PCS TJ3
• PCS DTW
3 - Safety
3.0 - Precautions
• Quick® Thrusters have been designed and constructed only for nautical use.
• Do not use these appliances for other uses.
• Quick® shall accept no responsibility for direct or indirect damages caused by improper use of the ap-
pliance or an improper installation.
•The Thruster is not designed to maintain loads generated in particular atmospheric conditions (storms).
• We recommend you entrust preparation and positioning of the tube on the hull to a skilled professional.
These are generic instructions and do not give details of the preparatory operations for installing the tunnel,
since this is the competence of the boatyard. The installer shall bear full responsibility for any problems cau-
sed by defective installation of the tunnel.
• In case of problems caused by a defective installation, the installer will be held responsible.
• Do not install the electric motor near easily inflammable objects.
INSTALLATION AND USE MANUAL BTH 513 - REV001A
BTH 513
EN
21