Quick BTH 513 Installation And Use Manual page 29

5 - Installation
5.5 - Coupling/Motor assembling
4
3
2
1
1 - Grease the end part of the reducer and insert the lower
half-joint and fix it with an elastic ring.
2 - Assemble the even tension device and the upper
half-coupling to the gearbox.
3 - Fix the motor flange with the 4 provided screws and
washers.
4 - Insert the motor on the elastic coupling, fix with the 4
provided screws and washers.
INSTALLATION AND USE MANUAL BTH 513 - REV001A
BTH 513
EN
29