Quick BTH 513 Installation And Use Manual page 28

5 - Installation
5.4 - Propellers fitting
Insert the drive pins A into the hole on the gearleg shafts B, assemble the propellers C to the gearleg, making it
fit in correctly with the drive pins A, fix the propellers with the self-braking nuts D and tight screw E. The anodes F
must be locked with the screws F soaked with building adhesive (such as Loctite).
B
WARNING: on conclusion of assembly, make
sure that the propellers are exactly positioned
at the central point of the tunnel.
28
A
INSTALLATION AND USE MANUAL BTH 513 - REV001A
BTH 513
C
D
E
F
EN
G