Quick BTH 513 Installation And Use Manual page 25

5 - Installation
5.1 - Gearleg and motor support flange
• Apply to the gearleg the special seal gasket.
INSTALLATION AND USE MANUAL BTH 513 - REV001A
• Remove the lid on the gearbox and insert the
connection to subsequently connect the oil tank.
• Screw on and turn the connection's head
towards the center, in order to ease the coupling
with the flange.
• Proceed with fitting the gearleg.
• For further protection against the entry of wa-
ter, apply silicone for nautical use around the
point of contact between flange and tube.
• Fasten everything to the flange using the special
screws.
BTH 513
EN
25