Operating the System
Free Examination Procedures
4.6 Free Examination Procedures
4.6.1 Free Mode
4.6.1.1 General
The Free mode is designed for emergency examinations. The servo button cannot be acti-
vated in Free mode, consequently no automatic movement is available.
4.6.1.2 Flow of Operation
Select a Free mode examination.
The System display will display the following, see Fig. 4-7 Free mode display.
• The stand will display H, distance to the floor.
• All movements are available.
4.6.1.3 Exposure
Exposure is possible when the OTC is not moving.
Note!
The OTC will automatically enter the "Free mode" at start-up.
OMNERA®
Fig. 4-7 Free mode display
0073-095-418-EN Rev. 5.1
Page 86
Operator´s Manual
2020-09-25