Sample Operation Creation - Merck Millipore Mobius Chrom 20 System User Manual

90
Phase 4 Total Time
Phase 4 Total Volume
Phase 4 Total CVs
Phase 5 Total Time
Phase 5 Total Volume
Phase 5 Total CVs
Phase 0 Prompt OK
Phase 0 Prompt Yes
Phase 0 Prompt No

Sample Operation Creation

The following example illustrates the creation of an operation for the system. For details on
what Actions and Criteria are available with the system, see the previous sections of this
document titled Recipe Editor Actions Summary and Recipe Editor Criteria Summary.
To create a simple operation to do the following:
1. Place the system in Global Auto Mode
2. Place the system in Default state.
3. Wait 2 seconds, put Inlet 1A online.
4. Wait 2 seconds, put Bubble Trap online.
5. Wait 2 seconds, put Column operated in reverse.
6. Wait 2 seconds, put Fraction 1 open.
7. Wait 2 seconds, set the Pump to speed control mode.
8. Wait 2 seconds, set a speed of 50%.
9. Wait for operation to run for 20 sec, start the pump.
10. Wait for 20 liters to pass through the system, stop the pump.
The actions are shown listed in order below:
Checks the answer buttons associated with a
message-based dialog box.
Phase prompt criteria may be used only in the
next step after a step with a prompt that is
being examined.
Only one of the criteria Phase Prompt Yes
and Phase Prompt No can be used following a
phase prompt.
User Guide