Column - Merck Millipore Mobius Chrom 20 System User Manual

172
PCV Section
The Pressure Control Valve has a detailed panel which allows the following:
• Set its position setpoint
• Set the ramp rate
• Open/Close it fully through a single button
The ramp rate set the rate, in %/sec, at which the CV will increase or decrease to get the
desired PV.
Filter Section
The Filter panel allows to set the related flowpaths.
Flow Path
Online
Bypass
Button
Online
Bypass
User

Column

Flowpath Section
The column flowpath panel allows to set the related flowpaths.
XV017
Open
The Online button changes the flow path to allow for the material to
pass through the filter.
The Bypass button changes the flow path to prohibit material from
passing through the filter.
The User button sets the flow path according to the Filter 1 User Flow
Path configured in the Flow Path Config section of the Maintenance
Status Display Screen.
XV018
Open
Function
User Guide
XV019
Open