Configuring Analog Data - Merck Millipore Mobius Chrom 20 System User Manual

Mobius Chrom 20 System with Flexware
®

Configuring Analog Data

When either the Full Report or the Historical Trend boxes are checked within the Report
Selections box, the Configure button is enabled. The Configure button allows the user to define
which sensor data archived by the unit is actually included within a particular report.
When the Configure button is clicked, the Analog Data Configuration table is displayed in the
bottom part of the Report Generator form.
Columns in the Analog Data Configuration Screen
Column
Description
Graph
Tabular
Interval
Chart Mark
X-Axis
Alternate Start Time
Tag
Y-Axis
Low/High
EGU
Color
Assemblies
®
A description of the data that will be included in the report.
A checkbox to select if the data is to be presented in a graph.
A checkbox to select if the data is to be presented in tabular form.
The frequency of the data included within the report. In this case,
one data point per 10 seconds is going to be included for all the tags
in the chart groups.
A checkbox to select if chart marks created during the process are
going to be included in the chart.
A drop-down box to select the X-Axis variable. The choices are Time,
CV and Volume.
The time for which values will be returned for an individual tag that is
different than the Start Time of the selected run.
The tag whose value will be returned.
A checkbox to select if the tag's data is to be presented along the
Y-Axis.
The low and high range of the engineering units of the tag. Defaults
to the tag range in the system but can be manually changed.
Engineering Units of the tag. Defaults to the tag EGU stored in the
system but can be manually changed.
Color of the trend for that tag. Can be manually changed.
Description
103