Merck Millipore Mobius Chrom 20 System User Manual page 85

Mobius Chrom 20 System with Flexware
®
Miscellaneous
Holdup Volume
HETP Start
HETP End
Start User Totalizers
Stop User Totalizers
Reset User Totalizers
Log User Totalizers
User Non Critical Alarm 1
User Critical Alarm 1
User Non Critical Alarm 2
User Critical Alarm 2
Set Exchange AO #1 Value
Set Exchange AO #2 Value
Set Exchange AO #3 Value
Set Exchange AO #4 Value
Exchange DO #1 On
Exchange DO #1 OFF
Exchange DO #2 On
Exchange DO #2 OFF
Exchange DO #3 On
Exchange DO #3 OFF
Exchange DO #4 On
Exchange DO #4 OFF
Exchange DO #5 On
Exchange DO #5 OFF
Exchange DO #6 On
Exchange DO #6 OFF
Exchange DO #7 On
Exchange DO #7 OFF
Exchange DO #8 On
Exchange DO #8 OFF
Operations and Phase Control
If Criteria Met then Jump to Label:
System Hold
Operation Abort
Operation Pause
Assemblies
®
Sets the volume of fluid held in the system
flowpath
Flags the start of HETP data to be used by
the HETP report.
Flags the end of HETP data to be used by the
HETP report.
Starts the user totalizer
Stops the user totalizer
Resets the user totalizer
Logs the user totalizer
Triggers the User non critical alarm #1
Triggers the User critical alarm #1
Triggers the User non critical alarm #2
Triggers the User critical alarm #2
Sets the analog output exchange value #1
Sets the analog output exchange value #2
Sets the analog output exchange value #3
Sets the analog output exchange value #4
On
Off
If the criteria are met, the operation jumps to
another labeled action
Sets the system to hold state
Aborts the running operation
Pauses the running operation
Sets the digital exchange value
Resets the digital exchange value
85