Saving Changes To Historical Assign Configuration; Exiting The Historical Assign Program - Merck Millipore Mobius Chrom 20 System User Manual

242

Saving Changes to Historical Assign Configuration

To save changes to the Historical Assign program, two separate operations are required.
1. Select Save from the File menu. This operation saves the changes made, to support data
collection.
2. Select Save As from the File menu. In the File name field in the Save As window, enter the
following path and filename: "C:\millipore\ccpsystem\{SystemID}\ini\hta-cfg.csv" where
{SystemID} depends to the clamshell family used by the system (e.g. XMO4 by Chrom20).
This operation saves the changes made, to support batch reporting.
Data collection and batch reporting will not function as desired unless both operations to save
the configuration have been performed.

Exiting the Historical Assign Program

To exit the Historical Assign program, select Exit from the File menu and the window will close.
If changes have not been saved, the system prompts the user to do so before exiting.
Note Do NOT exit the Historical Assign Program until BOTH operations described under Saving
Changes to Historical Assign Configuration, above, have been performed.
Data collection and batch reporting will not function as desired unless both operations to
save the configuration have been performed.
User Guide