Suzuki UG110 2021 Service Manual page 70

• Install the driveshaft 1 and dowel pins 2.
• Install the gear box cover with gears.
5
Apply SUZUKI BOND "1215" to the new gasket and thread
of the bolt A.
( 99000-31110: SUZUKI BOND "1215"
• Tighten the bolts to the specified torque in the ascending order
of numbers.
" Gear box cover bolt: 22 N . m (2.2 kgf . m)
• Install rear axle shaft spacer 3 in the correct direction.
• Apply a light coat of SUZUKI SUPER GREASE "A" onto the
pivoting surface of the brake cam, and then install the brake
cam into the crankcase.
$ 99000-25010: SUZUKI SUPER GREASE "A"
• Position the brake cam so that the line B faces the rear axle
shaft.
ENGINE 3-41