3-36
ENGINE
ENGINE MOUNTING BUSHINGS
Inspect engine mounting bushings 1 and rear shock absorber
bushing 2 for damage.
If any damage is found, replace the bushing with a new one.
• Press out the each bushing in a vise using two steel tubes of
the appropriate size, as shown.
5
Replace the removed bushing with a new one.
• Install the bushings using two steel tubes of the appropriate
size and a vise. Press the bushings 1 and 2 into the crank-
case holes, as shown.
NOTE:
The knurled end 3 should face in. Projections A and B should
be aligned evenly.