4-8
FUEL AND LUBRICATION SYSTEM
FUEL VALVE
INSPECTION AND REMOVAL
!
Gaosoline is highly flammable and explosive.
Keep heat, sparks, and flames away from gasoline.
• Remove the lower leg shield. (75-5)
• Disconnect the fuel valve vacuum hose 1 from the carburetor.
• Disconnect the fuel hose 2 from the fuel pump.
• Apply negative pressure A to the fuel valve and then check the
fuel flow.
If fuel does not flow, replace the fuel valve with a new one.
• Disconnect the fuel tank air vent hose 3, fuel hose 4, fuel
valve vacuum hose 5 and fuel hose 2 from the fuel valve.
• Remove the fuel valve.
REMOUNTING
Remount the fuel valve in the reverse order of removal.
Pay attention to the following point.
• Properly route the fuel valve hoses. (77-12)