Scale Property - Labomed Pixel Pro 3.2 User Manual

R
PixelPro 3.2 Instruction Manual
Undo: Undoes the last action.
Reset: Clears all classes and the counter table.
Default: Resets parameters for all classes without clearing them.
Start Class Counting: Select a category, then left click on the targets in the image to count.
Count results will be automatically displayed on the data table.
After counting with one or more categories, all counting results will be displayed on the
counting table. Click [Export to Excel] to save data in Excel format.
5.7

Scale Property

PixelPro allows the user to customize scale properties.
Show Scale: Displays the scale on the measured image when checked. Default setting is
off. Scale will automatically be positioned at the top left of the image, and can be dragged
to any desired position.
Type: Toggles manual or automatic display of the current scale. Default value is
automatic.
Align: Sets the alignment between the current scale and the value. Options are left,
center, and right alignment. Default value is center.
Orientation: Toggles horizontal or vertical display direction of the current scale. Default
value is horizontal.
Name: Gives the scale applied to the current image a custom name. This field is not
pre-filled by default.
Length: The space, in 100-pixel increments, within which the scale is displayed. Default
value is 100.
52