Automatic Counting - Labomed Pixel Pro 3.2 User Manual

R
PixelPro 3.2 Instruction Manual
Note: This function is not supported on the Mac version.

4.10 Automatic Counting

The Automatic Counting setting interface is shown below.
Start Counting: Click to enter the counting process.
All: The counting area is the full image.
Rectangle: Left-click to diagonally opposite corners of a rectangular area. The counting
area is the selected rectangle.
Polygon: Left-click multiple times to draw a polygon. Double-click to end drawing. The
counting area is the selected polygon.
Restart Counting: Returns to the Start Counting interface.
Next: Go to next step.
39