Save Settings - Labomed Pixel Pro 3.2 User Manual

PixelPro 3.2 Instruction Manual
obtain a better imaging effect.
Notes:
1) An appropriate number of accumulated frames should be set for integrated
photographing, otherwise the image brightness will be too high and distortion will
occur.
2) "Integration frame number" and "integration time length" cannot be enabled at the
same time.
Dark Field Correction: Solves the problem of chip edge light and background
disuniformity.
1) Dark Field Correction becomes available only after importing images to be corrected.
The function can be turned off by unchecking the box afterward.
2) Click the [Correct] button and follow the prompt. Click next to calculate the
correction coefficient automatically.
3) Number of frames ranges from 1 to 99. Default is 10.
4) Import and export are import and export correction factors, respectively.
5) Dark field correction should be performed for different exposure times and scenes,
as needed.
6) The module remembers the frame number setting from one session to the next, but
not correction status or coefficient.

3.20 Save Settings

The program allows managing groups of experiment parameters for the user's
convenience in using the camera in different applications or platforms.
The user can save and re-load set parameters from different experiment statuses and
then apply them to new experiment projects. This function will save the user time,
improve working efficiency and ensure reproducibility of experiment results. The
parameter group saver allows the user to save all the software functions and modules
mentioned above (with the exception of the flat field correction module).
28
R