Measure Layer - Labomed Pixel Pro 3.2 User Manual

R
PixelPro 3.2 Instruction Manual
5.3

Measure Layer

Measure Layer: The user can create multiple layers on the image and make different
measurements on different layers.
This layer creating module meet the needs of a large number of image measuring and
image processing applications.
If some targets on the current image have already been measured, the layer creating
function will automatically create a [Background] layer for those existing measurements
and display the new measurements on [Layer 01].
You can choose to display the measurement data from different layers or choose to view
the different layers.
The user can choose which measurement layers are visible by checking the
corresponding box in the [Current] column. Only one box in this column can be checked
at a time.
Check a box under the [Visible] column to display the measurement results of the
corresponding layer. Any and all boxes in this column can be checked at a time.
New: Creates and names a new layer. The default layer naming pattern is [Layer NN],
where NN is an incrementing two-digit number.
Delete: Deletes the selected layer.
47