Mask - Labomed Pixel Pro 3.2 User Manual

R
PixelPro 3.2 Instruction Manual
Select ROI: Use a computer mouse. Check this box, then click and drag within the image
preview to define the window area of the ROI. This window area displays the coordinate
values and resolution of the current running task. Click on the [√] below the cursor to
apply the ROI settings.
Set Area and Coordinates of ROI: Manually enter the starting point coordinate values
and the resolution size to define an exact ROI area. Enter the point offset position of the
rectangular area from the top left corner of the image, as well as the width and height,
then click [OK] to apply the ROI settings.

3.12 Mask

Select Masking Area: Use a computer mouse. Click and drag within the image preview
to define the window area to be masked. This window area will display the coordinate
values and resolution of the current running task. Click on the [√] below the cursor to
apply the mask settings.
Set Masking Area and Coordinates: Manually enter the starting point coordinate values
and resolution size to define an exact masking area. Enter the point offset position of the
rectangular area as well as the width and height, then click [OK] to apply the mask
settings.
Transparency: Manually select the brightness of the unmasked area.
20