Video Record - Labomed Pixel Pro 3.2 User Manual

R
PixelPro 3.2 Instruction Manual
Apply: Applies the selected dye color to the image.
Cancel: Stops applying any dyes added through custom mode.

3.16 Video Record

Click on [Video Record] to save image data into video formats for playing back to observe
the process of a sample's live movements.
Encoder: The program provides two compression formats: [Full frame (No compression)]
and [MPEG-4]. The video sizes generated by different compression formats can vary, and
the user may choose either format according to the needs of each task.
Total Frame: Captures images according to how many frames were set to be captured.
Setting ranges from 1 to 9999 frames.
Total Time(s): The length of time spent capturing images based on how long the time is
set to. Setting ranges from 1 to 9999 seconds.
Delay time: Introduces a delay before capturing images. Three time unit options:
minutes, seconds and milliseconds. Setting ranges from 1 millisecond to 120 minutes.
Playback Rate: Records according to the set playback frame rate.
Video Format: AVI, MP4, and WMA are supported. The default format is AVI.
Save to Hard Disk: Immediately writes the video to disk. The image data is written to the
hard drive during the image capturing process. In this mode, transmission speed from
camera to computer will be reduced due to the computer writing image data to its hard
drive, so this mode is not suitable for capturing images of quickly changing scenes or
backgrounds; it is better suited for long periods of capturing.
24