Table of Contents
Advertisement
PixelPro 3.2 Instruction Manual
3.3
Binning
Binning: Binning mode can improve image sensitivity. Increasing the value increases the
sensitivity.
Note: This function performs sum binning based on the original data; the amount of data
does not change, so the frame rate does not change.
3.4
Exposure Control
Set the exposure time of the camera. The value of real-time frames per second (FPS) is
displayed.
Target Value: The adjustment target value can change the automatic exposure
brightness of the image. The target value range for USB3.0 series is from 10 to 245; for
USB2.0 series and HDMI series, from 0 to 15.
Auto Exposure: When the [Auto Exposure] box is checked, the software automatically
adjusts exposure time to obtain an image with appropriate brightness.
Area Exposure: When the [Area Exposure] box is checked, the software automatically
adjusts the exposure time according to the image brightness in the area.
Manual Exposure: If the [Auto Exposure] box is not checked, the system switches to
[Manual Exposure] mode, where the user can manually input the exposure time
according to image requirements. Click the [OK] button to apply, or manually adjust the
exposure time with the slider.
Gain: The user can select the most suitable amount of gain according to specific
applications and needs upon previewing images. Higher gain improves image brightness,
but also increases noise.
Default: Click the [Default] button to restore this module's parameters to factory settings.
12
R
Advertisement
Table of Contents
