General Introduction - Labomed Pixel Pro 3.2 User Manual

R
PixelPro 3.2 Instruction Manual

General Introduction

PixelPro is a powerful software package integrating controls for micro-imaging cameras,
imaging calculation, image processing, and a measuring and counting work flow,
allowing the user to enjoy an improved operating experience.
PixelPro can drive and control cameras installed on microscopes from different
manufacturers, helping to bring the user the best performance for micro-imaging tasks.
When a user needs to make the best use of a microscope and its cameras' potential,
PixelPro can accurately adjust all the parameters you select, and optimizes the settings
of these parameters through its user-friendly interface.
PixelPro enables the user to set up customized configurations according to their actual
applications. When a user combines customized configurations with customized work
flows, the software presents a personalized working layout, ensuring accuracy for the
user's experiment results whether the software is being used for multiple tasks or by
multiple users.
PixelPro achieves superior quality images due to its powerful real-time calculating engine.
The real-time image stitching function helps the user to obtain a super wide FOV image
from the mechanical motion of the microscope. Real-time extended-depth-focusing
(EDF) functions can offer the user a combined picture in less than one second.
In order to achieve the best operating procedures from a user's point of view, the
developers of PixelPro have refined the all-new camera operating work flow as Efficient
image acquisition->Image edition->Measurement->Report by modularizing designs. This
workflow acts in concert with the latest image processing algorithms, greatly saves the
user operation time, and improves working efficiency.
4