Calibration - Labomed Pixel Pro 3.2 User Manual

Table of Contents

PixelPro 3.2 Instruction Manual

Paintbrush: Draws a freehand curve on the preview screen.

Arrow: Draws a pointer arrow with two clicks.

Text: Adds a text note to the image.

Select: Graphics or text notes drawn on the image can be selected. When the cursor,

moved to the vicinity of graphics or text, changes from

, the element can be

dragged to a new position or deleted by pressing [Delete].

Delete: Deletes drawn or measured graphics.

Undelete: Undo the last delete operation.

Clear All: Removes all drawn and measured graphics or text on the current layer.

Combine: When saving the image, the drawn or measured graphics or text will be baked

onto the image. Otherwise, measured graphics or texts remain editable when the image

is opened again. The default state of this function is active.

Data Property: Each graphic has a corresponding data type, such as length, angle, slope,

diameter, perimeter, area, etc. Graphics drawn after checking and their associated

information will appear on pictures at the same time.

Right click to toggle between drawing and selection modes.

When the mouse is in the

state, scroll the wheel to zoom in/out, and hold down

the mouse wheel button to drag the picture.

When the mouse is in the

state, scroll the wheel to zoom in/out, hold down the

mouse wheel button on a graphic to drag the graphic, and hold down the mouse wheel

button on the endpoint of a graphic

to edit the graphic.

All drawing and measuring graphic data information will be saved in the measurement

table. Click [Export to Excel] or [Export to TXT] to save data information in EXCEL form

format or TXT document format. Click [Copy] to copy the entire table to the clipboard

for pasting elsewhere.

5.2

Calibration

The calibration ruler converts the number of pixels into meaningful measurement units,

and supports conversion units of nm, µm, mm, inch, 1/10 inch, 1/100 inch, and 1/1000

Table of Contents