Table of Contents
Advertisement
4 Configuration
To: Specify the destination of accessible packets. The possible values are:
Any - Indicates ACL action will be on packets from any source.
MAC Address - Indicates ACL action will be on packets from this MAC address. The field of format
is xx-xx-xx-xx-xx-xx.
IPv4 Addresses - Indicates ACL action will be on packets from this IPv4 destination address.
IPv6 Addresses - Indicates ACL action will be on packets from this IPv46 destination address.
Service Type: Specify the type of service. The possible values are:
Any - Indicates ACL action will be on packets from any service type.
Ether type - Specifies an Ethernet type for filtering packets.
ICMP All - Indicates ACL action will be on packets from ICMP packets.
IGMP - IGMP packets can be filtered by IGMP message type.
TCP All - Indicates ACL action will be on packets from TCP Packets.
TCP Source Port - Matches the packet to the TCP Source Port.
TCP Destination Port - Matches the packet to the TCP Destination Port.
UDP All - Indicates ACL action will be on packets from UDP Packets.
UDP Source Port - Matches the packet to the UDP Source Port.
UDP Destination Port - Matches the packet to the UDP Destination Port.
Action: Specify the ACL forwarding action matching the rule criteria.
Permit - Forwards packets if all other ACL criteria are met.
Deny - Drops packets if all other ACL criteria is met.
Mirror - Mirrors packets if all other ACL criteria are met.
Replace 1P: Replace 1P if all other ACL criteria are met.
Replace Queue: Replace queue if all other ACL criteria are met.
Replace DSCP - Reassigns a new DSCP value to the packet if all other ACL criteria are met.
Port: Enter a range of ports to be configured.
Press Apply for the settings to take effect.
ACL > Access Profile List
The Access Profile List provides information for configuring ACL Profiles manually. ACL profiles are attached
to interfaces, and define how packets are forwarded if they match the ACL criteria.
DES-1210/ME Series Metro Ethernet Managed Switch User Manual
NOTE: Once the ACL rules conflict, rules with
smaller rule ID will take higher priority.
NOTE: Be careful when configuring ACL rules, an
inappropriate may cause management access
failed.
Figure 4.188 - ACL > Access Profile List
1
1
1
1
5
5
Advertisement
Table of Contents
