Tool Bar > Online Help; Function Tree; Device Information - D-Link DES-1210/ME Series Manual

4 Configuration
FTP Server IP Address: Specify the IPv4 or IPv6 address.
FTP username: Enter the user name which you want to backup/restore from for the configuration.
FTP password: Enter the password which you want to backup /restore from for the configuration.
FTP Port: Enter the port which you want to backup /restore from for the FTP server.
FTP Path: Enter the path which you want to backup /restore from for the FTP server.
FTP File Name: Specifies the file name which you want to backup /restore from for the configuration.
Click Backup to save the firmware to the FTP server.
Click Upgrade after selecting the firmware file you want to restore.
Tool Bar > Online Help
The Online Help provides two ways of online support:
D-Link Support Site: This will lead you to the D-Link website where you can find online resources such as
updated firmware images.
User Guide: This can offer an immediate reference for the feature definition or configuration guide.
Click Apply to make configuration effected.

Function Tree

All configuration options on the switch are accessed through the Setup menu on the left side of the screen.
Click on the setup item that you want to configure. The following sections provide more detailed description
of each feature and function.

Device Information

The Device Information provides an overview of the switch, including essential information such as firmware
& hardware information, and IP address.
DES-1210/ME Series Metro Ethernet Managed Switch User Manual
CAUTION: Do not disconnect the PC or remove
the power cord from device until the upgrade
completes. The Switch may crash if the
Firmware upgrade is incomplete.
Figure 4.10 – Online Help
Figure 4.11 –Function Tree
16