Description; Area Of Application And Features; Functions Of The Instructions - Siemens SIMATIC Ident Function Manual

Description

2.1

Area of application and features

The Ident profile can be used in Rockwell controllers with an Ethernet/IP interface. The
modules can be configured using the "Studio 5000 Logix Designer" or "RSLogix 5000"
programs.
Figure 2-1
2.2

Functions of the instructions

The "Ident_Profile" instruction serves as the communication interface between an Ident
device (e.g. RFID 181EIP) and the user program. The instruction supports the following
functions:
• Configuration
• Editing commands
• Reading and writing of data
• Diagnostics
The Ident profile is a single complex instruction containing all the commands and
functions for RFID systems and code reader systems. The parameter instructions
("Param_RF18xC", "Param_RFID181EIP" or "Param_RF600") are used to configure the
respective Ident device during startup.
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 07/2020, C79000-G8976-C410-04
Configurable module: RF18xC/RF18xCI, RFID 181EIP and RF61xR/RF68xR
2
9