Siemens SIMATIC Ident Function Manual page 83

CONFIG" (0x03) is used for the download to the CM/reader and "READ-CONFIG" for
the upload from the reader.
LEN_DATA = Size of the configuration data + 6 bytes
• When CONFIG = 0x80:
This command allows you to change UHF parameters (e.g. the antenna power) on an
RF61xR/RF68xR, as well as the date/time parameters of an RF166C or
RF18xC/RF18xCI during runtime.
You can find possible values for parameter identification and value in section
"Set_Param (Page 49)".
LEN_DATA = 0x08
For RF200, RF300 and Freeport
Table 4- 71 For RF200, RF300 and Freeport with "CONFIG = 0x03".
Byte 1 2...5
Value 0x04 0x00
(RF200,
RF300)
Value 0x04 0x00
(Free-
port)
With the readers named in the title of the table the value "0x0A" (LEN_DATA = 0x10) is used in byte 6. In the
1)
MOBY I migration in RF300 readers of the second generation the value "0x05" (LEN_DATA = 0x0B) is used.
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 07/2020, C79000-G8976-C410-04
Byte
0
2
6
10 ... end "DATA"
Byte
0 ... 3
4 ... 7
6 7...8 9
1)
0x0A 0x00 scan-
0x05 ning_
time
0x0A 0x00 0x00
Name
Structure identifier (2 bytes)
Length information (4 bytes)
Length of the version identifier and parameter block
Version identifier (4 bytes)
Based on the identifier, you can uniquely identify the configuration.
This is a time stamp in Linux format.
The time stamp indicates how many seconds have passed since
January 1, 1979, 00:00 (midnight). The identifier is assigned when
a configuration is generated.
Parameter block
Name
Parameter identification "PARMID" (4 bytes)
Parameter value "VALUE" (4 bytes)
10 11 12
param option_1 distance_
limiting
0x00 option_1 0x00
Configuring the instructions
4.6 Programming the Ident profile
13...14 15
No. of field_on_
tran- control
sponders
0x00 0x00
16
field_on_
time
0x00
83