Param_Rf18Xc - Siemens SIMATIC Ident Function Manual

4.5.1.2

Param_RF18xC

You can use the "Param_RF18xC" instruction to transfer the configuration data to an
RF18xC/RF18xCI communication module.
Figure 4-3
Table 4- 12 Explanation for the instruction "Param_RF18xC"
Parameter
DEVICE_
PARAMETERS
READER_
CONFIGDATA
MSG_PARAM
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 07/2020, C79000-G8976-C410-04
"Param_RF18xC" instruction
Data type
IID_PARAMETER_
RF18XC
IID_DATA_
RF18XC
MESSAGE
Default values Description
-- The channels of the communication
module can be configured with this
variable.
You can find detailed information on
the creation and configuration of
variables in the section "Creating a
parameter variable
(RF18xC/RF18xCI) (Page 20)".
-- The configuration variable contains
the buffer for the configuration data
and the "HW_CONNECT" variables
which are required for operation of
the individual channels.
You can find detailed information on
creating variables in the section
"Creating configuration variables
(Page 17)".
-- The message variable transfers the
configuration data from the buffer of
the configuration variable to the
Ident device.
You can find detailed information on
the creation and configuration of
variables in the section "Configuring
the message variable for configura-
tion (Page 18)".
Configuring the instructions
4.5 Programming instructions
31