Configuring the instructions
4.5 Programming instructions
4.5.3.7
Set_Ant
Using the "Set_Ant" instruction, you can switch antennas on or off. The "Set_Ant_RF300"
instruction can also be used for RF200.
Set_Ant_RF300
Figure 4-16 Instruction "Set_Ant_RF300"
Table 4- 28 Explanation for the instruction "Set_Ant_RF300"
Parameter
ANTENNA
48
Data type
Default values
BOOL
Description
0 = turn antenna off
1 = turn antenna on
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 07/2020, C79000-G8976-C410-04