Read_Epc_Mem - Siemens SIMATIC Ident Function Manual

Name
time
power
filterDataAvailable
Inventoried
TAG_DATA[2]
...
TAG_DATA[n]
Indicates how often the transponder was identified via the air interface before it changed to the "Observed" status.
1)
4.5.3.4

Read_EPC_Mem

The "Read_EPC_Mem" instruction reads data starting at address 4 from the EPC
memory of the RF600 transponder. Access is to bank 1 as of the start address 4. The
length of the EPC memory to be read out is specified by the "LEN_DATA" parameter.
Figure 4-13 Instruction "Read_EPC_Mem"
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 07/2020, C79000-G8976-C410-04
Type Comment
DINT timestamp
SINT power in dBm
SINT 0=false; 1=true
INT
1)
IID_IN_1_81
...
IID_IN_1_81
Configuring the instructions
4.5 Programming instructions
45