Detaching The Header (M200 Windrowers) - MacDon R85 Operator's Manual

5.8.2 Detaching the Header (M200 Windrowers)

Refer to your windrower operator's manual for procedure to mechanically detach the header from a self-propelled
windrower. Refer to the following procedure to disconnect electrical and hydraulic systems:
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Lower header to ground. If ground is soft, place blocks
under header.
2. Stop engine and remove key.
3. Move left side
open position.
4. Disconnect pressure (B) and return (C) hoses from
fittings on valve block (A).
5. Install plugs and caps on open windrower lines and
header hoses.
169457
(cab-forward) platform
OPERATION
(A) to
Figure 5.59: Windrower LH Platform
Figure 5.60: Hydraulic Connections
58
Revision G