Maintenance Schedule/Record - MacDon R85 Operator's Manual

7.5.1 Maintenance Schedule/Record

Action:
Hour meter reading



First use
100 hours or annually
Conditioner drive belt
 Refer to
Inspecting the Conditioner
Drive Belt, page 146.
Auger drive belts
 Refer to
Inspecting the Auger Drive
Belts, page 154.
Conditioner gearbox lube level
Refer to

7.7.3 Conditioner Gearbox,
page 150.
Bevel gearbox lube level
Refer to

7.7.1 Bevel Gearbox, page
145.
End of season
10 hours or daily
Hydraulic hoses and lines
 Refer to
7.8.2 Hydraulic Hoses and
Lines, page 160.
Cutter blades, deflectors, and discs
 Refer to
7.6.1
Cutterbar Discs, page
25 hours
Roll universal shafts
 Refer to
7.5.5 Lubrication and
Servicing, page 118.
Cutterbar driveline bearings
 Refer to
7.5.5 Lubrication and
Servicing, page 118.
50 HOURS
Cutterbar lube first 50 and 150 hours
▲ Refer to
7.5.8 Lubricating the
Cutterbar, page 124.
Bevel gearbox lube level first 50 and
150 hours
▲
Refer to
7.7.1 Bevel Gearbox, page
145.
169457
MAINTENANCE AND SERVICING
 - Check
Service date
Serviced by
Refer to
Refer to
Refer to
Inspecting the
NOTE:
130.
A record of daily maintenance is not normally required, but is at
the Owner/Operator's discretion.
 - Lubricate
7.5.2 Break-In Inspections, page
7.5.3 Preseason/Annual Service, page
7.5.4 End-of-Season Service, page
115
▲ - Change
117.
117.
118.
Revision G