Header Angle - MacDon R85 Operator's Manual

OPERATING THE HEADER

6.6 Header Angle

Header (or cutterbar) angle can be varied from 0–8° below horizontal. Choose an angle that maximizes performance
for your crop and field conditions. A flatter angle provides better clearance in stony conditions while a steeper angle
provides better lifting action in down crops.
The header angle may be hydraulically adjusted from the
windrower cab using the hydraulic cylinder (A) without
shutting down the windrower.
Refer to your windrower operator's manual.
Figure 6.17: Hydraulic Center-Link
77
169457 Revision G