Closing The Cutterbar Doors: Export Header - MacDon R85 Operator's Manual

OPERATION
2. Insert a screwdriver (or equivalent) through hole (A) in
door into notch in latch (B) and push latch to disengage.
3. Lift at front of door to open.
Figure 5.17: Cutterbar Door Latch

5.5.4 Closing the Cutterbar Doors: Export Header

To close the cutterbar doors on an export header follow these steps:
CAUTION
To avoid injury, keep hands and fingers away from corners of doors when closing.
37
169457 Revision G