5.8 Detaching the Header
5.8.1 Detaching the Header (M205 Windrowers)
Refer to your windrower operator's manual for procedure to mechanically detach the header from a self-propelled
windrower. Refer to the following procedure to disconnect electrical and hydraulic systems:
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Lower header to ground. If ground is soft, place blocks
under header.
2. Stop engine and remove key.
3. Move
left
side
open position.
169457
(cab-forward)
platform
OPERATION
(A)
to
Figure 5.50: Windrower LH Platform
54
Revision G